(1) Is there any question about checking the power supply, air pressure, and exhaust equipment of the hot press every day?If in doubt, it should be dealt with in a timely manner. (2) After the hot press is used every day, it must perform the necessary cleaning operations to maintain its cleanliness. (3) In order to prevent the machinery and equipment from being corroded, you can use alcohol to scrub the machinery and equipment, but you cannot use corrosive cleaning agents, which will corrode the machinery and equipment and prevent them from operating normally. (4) Always check the piston and seals.If the sealing ring is worn or the device is incorrect, it will show the appearance of oil leakage and then affect the normal operation of the heat press. (5) The hydraulic oil should be kept clean, and the oil tank should be capped and sealed. In addition, the strainer should be kept intact and clean without any damage.If it is damaged, it should be replaced in time. (6) The upper and lower lining plates of the hot-pressing plate in the hot-pressing machine should be regularly disassembled for inspection and cleaning.Generally speaking, the upper board should be replaced once a week, and then the quality of the finished board is ensured.